FC2ブログ
自分の備忘録ぐらいに適当に。 ネットワークと宇宙開発と天文とそれと自転車を徒然と。
備忘録。

ちょっと修正。

関連記事:Catalyst Cシリーズスイッチ
http://networkerslog.blog137.fc2.com/blog-entry-104.html

Compactスイッチである Cシリーズスイッチ(Cat3560C/Cat2960C)の機能確認をする場合の留意事項。

ざっくりまとめてしまうと基本的には
12.2(55)SE と同じで、
下記の”Catalyst 3560-C Features”や”Catalyst 2960-C Features”が差分となる、
という感じみたいです。


Release Notes for the Catalyst 3560-C Switch, Cisco IOS Release 12.2(55)EX and Later
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960c_3560c/software/release/12.2_55_ex/release/notes/ol24071.html#wp1041927

The Catalyst 3560-C universal image is an IP base image. Unless otherwise indicated, the software supports all features that are supported by the Catalyst 3560 IP base image in Cisco IOS Release 12.2(55)SE and that are described in the Catalyst 3560 software configuration guide and command reference.

Catalyst 3560-C Features
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960c_3560c/software/release/12.2_55_ex/release/notes/ol24071.html#wp1171720

The Catalyst 3560-C compact switches also support these features that are not supported on Catalyst 3560 switches in Cisco IOS Release 12.2(55)SE:
・USB mini-type B console port and USB type A port
・Support for PoE+, power sensing, and power policing
・The Catalyst 3560CPD-8PT switches also support PoE pass-through. See the "PoE+ Uplinks and PoE Pass-Through Capability" section.
・Support for Media Access Control Security (MACsec)
・Support for IPv6 MIBs (Cisco-IEFT-IP-MIB and Cisco-IEFT-IP-Forwarding-MIB) and PoE policing MIB
・Support for a different switch database management (SDM) template than the Catalyst 3560 switch.
See the "Documentation Updates" section for configuration and commands for these features.

The Catalyst 3560-C does not support the IP services image.
-------------------------------------------------------
Note Do not activate the demonstration license for IP services on the switch, as it is not supported by Cisco.
-------------------------------------------------------
It also does not support these features that are supported in the Catalyst 3560 IP base image:
・Connections to redundant power supplies
・ISL trunks
・IPv6 ACLs
・IPv6 QoS
・Cisco Express Forwarding
・TCAM consistency check




Release Notes for the Catalyst 2960-C Switch, Cisco IOS Release 12.2(55)EX1 and Later
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960c_3560c/software/release/12.2_55_ex/release/notes/ol23942.html#wp1041927

The Catalyst 2960-C universal image is a LAN base image that supports most of the features supported by the Catalyst 2960 LAN base image in Cisco IOS Release 12.2(55)SE. These features are described in the Catalyst 2960 and 2960-S software configuration guide and command reference for that release.

Catalyst 2960-C Features
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960c_3560c/software/release/12.2_55_ex/release/notes/ol23942.html#wp1127354

The Catalyst 2960 features are documented in the Catalyst 2960 and 2960-S software configuration guide and command reference. The Catalyst 2960-C has these differences:
・Some Catalyst 2960-C switches support PoE pass-through. See the "PoE Uplinks and PoE Pass-Through Capability" section.
・Some models of the Catalyst 2960-C switches have an USB mini-Type B optional console port and a USB Type A port, like the Catalyst 2960-S switches. The Catalyst 2960CPD-8TT and 2960CPD-8PT switches have only the USB mini-Type B console port.
See the section on "Using the Switch USB Ports" for the Catalyst 2960-S switch in the software configuration guide and the media-type rj45 and usb line configuration commands in the command reference.
・The Catalyst 2960-C switches support only the default Switch Database Management (SDM) template.
 –The default template is a different template than either the Catalyst 2960 or Catalyst 2960-S default template.
 –You cannot configure any other SDM template on the Catalyst 2960-C.
 –The switch does not support static routing on SVIs.
 –Catalyst 2960CPD-8PT and 2960CPD-8TT switches do not support IPv6 host or IPv6 Multicast Listener Discovery (MLD) snooping.
See the "The Catalyst 2960-C SDM Template" section.

The Catalyst 2960-C also does not support these features that are supported on the Catalyst 2960:
・Connections to redundant power supplies
・ISL trunks
・Cisco Express Forwarding
・TCAM consistency check




追記。

知らない間に結構ラインナップが増えていました。

Cisco Catalyst 3560-C および 2960-C シリーズ コンパクト スイッチ
http://www.cisco.com/web/JP/product/hs/switches/cat2960c/prodlit/data_sheet_c78-639705.html

Catalyst 35600-Cシリーズ コンパクトスイッチ
WS-C3560CG-8TC-S
WS-C3560CG-8PC-S
WS-C3560CPD-8PT-S
WS-C3560C-8PC-S
WS-C3560C-12PC-S

Catalyst 2960-Cシリーズ コンパクトスイッチ
WS-C2960CPD-8TT-L
WS-C2960CPD-8PT-L
WS-C2960CG-8TC-L
WS-C2960C-8TC-L
WS-C2960C-8TC-S
WS-C2960C-8PC-L
WS-C2960C-12PC-L


追記^2

結構大きなところとしてCat3560-Cは IP Services に対応していない ということ(といってもOSPFには対応している記載もあり)。
同じ小さいスイッチで WS-C3560-8PC-S、WS-C3560-12PC-S があるけどこちらは IP services にアップグレード可能(CD-3560-EMI=を購入)。
※CD-3560-EMI=にWS-C3560-12PCが米国ページを見ても入っていないけど、たぶん行けるのでは???



関連記事

【2011/12/17 21:12】 | ツール・サポート情報
|
コメント
この記事へのコメント
コメントを投稿
URL:

Pass:
秘密: 管理者にだけ表示を許可